Wind speed and Direction Display for outdoor with data saving
WM44P-EVO11 is an high precision tool with 2 programmable alarm thresholds. Suitable for use in combination with Anemo4403 sensor, is also suitable with a wide range of rotating sensors.
2 programmable thresholds (ALARM 1 and ALARM 2) with last 96 hours graphic on screen and data recording in, removable, internal memory. The device can be easily mounted on board of instruments panel, doors of electrical panels and various types of industrial casing.
Particularly suitable for use in crane industry.
Visual Display
- Display in 128x64 pixels Graphic Liquid Crystal Display
- Ability to quickly select the measurement unit between Km/h or Mph or m/s anytime pressing SELECT button
- Automatic deactivation of the realy under the threshold level
- Selecting the mode for the alarm (intermittent, continuous, considered)
- 96 hours graphic and data saving on micro-SD
- Technical Features
- Standards
- Data Logger
- Download
Main Features
- Voltage: 230 Vac, 50-60 Hz, or 24Vdc
- Power consumption <3,5 VA
- Technology display in graphic liquid crystal display
- RF ConnectivityIEEE 802.15.4 Ism 2.4GHz
- Alarm relays 250 Vac, 8A
- Output type 4-20 mA
- Max connectable impedance 500 ohm
- Medium error 1,5 %
- Material polycarbonate
- Weight 0,350 Kg
- Storage temperature from -35° to + 70°
- Working temperature from -20° to + 70°
Data Logger Specification
- Internal memory capacity: 8 MB (50.000 events)
- External memory memory maximum capacity: 32 GB (8 GB-card supplied)
- Data format: .CSV
- RTC battery: CR2032
Wiring Diagram
Standard model diagram
Overall Size
Hole insertion
Regulations
Protection:
- IP65
- EN 61000-6-2:2001
- EN 55022:2001, Class B
- IEEE 802.15.4. ISM 2.4GHz
Data saving
Data logger function records the direction and wind speed in an internal memory.
The programming mode allows to change the frequency of the recording, for example by increasing recording times, or decreasing it having more data in less range time.
Once the data has been saved, it can be viewed on a computer.
The programming mode allows to change the frequency of the recording, for example by increasing recording times, or decreasing it having more data in less range time.
Once the data has been saved, it can be viewed on a computer.
Graphics
There are 2 graphics: last 40 hours with 10-minutes intervals and last 96 hours with 1-hour interval. In each one are shown the maximum and the average value of all periods.